Iron Will Reinforced HIT System

Iron Will Reinforced HIT System

49.95

You already use the toughest broadheads. Now, get the most out of them by reinforcing the end of your arrow with the Iron Will Arrow Reinforcement System. Comprised of our specially engineered HIT Inserts and hard-hitting Impact Collars, the system ensures the end of your arrow stands firm on impact, driving through your quarry with maximum penetration.

System includes six Iron Will HIT Inserts and six Impact Collars.

HIT Insert Size:
Impact Collar Size:
Quantity:
Add To Cart

Composite system of hardened steel, carbon fiber, and hardened steel provides improved arrow connection strength over outserts or half-outs.

reinforced HIT.png

Iron Will Impact Collars

These hardened stainless steel Impact Collars greatly increase the strength of the end of your arrow for the ultimate in bone penetration. Swiss CNC machined in the USA in the hardened state for unmatched precision. Six sizes total for .204 (5mm) and .165 (4mm) shafts to be used with Easton HIT inserts. These collars have a 1.0 inch long sleeve, similar to a footer, but with a small flange that goes over and protects the end of the shaft and also holds them in place. They are held on by the broadhead or field point and epoxy can be used to further increase strength. The compatibility chart shows our recommended sizes for many arrows or you can choose the one with an inner diameter slightly larger than your arrow outer diameter.

  • Hardened Stainless Steel

  • 25 grains each

  • 1.0 inch long

  • 6 sizes available

  • 6 per package


Iron Will HIT Inserts

  • Hardened steel HIT inserts for small diameter (.204 ID) and micro diameter (.166 ID - Deep Six) arrows.

  • Rounded back spreads pressure during arrow bending, preventing break point.

  • Broadhead aligns directly to arrow inner diameter, minimizing component tolerances and assuring it will spin true to the arrow.

  • Hardened steel ensures maximum impact strength.

  • Products protected by United States Patent No. 7,115,055 B2.  Manufactured under license.

  • Install with Easton HIT insert epoxy and tool

  • Six Per Package

  • Choose between 25, 50, 75, and 100 grains for additional Front of Center (FOC).